Model AV-RW · Framed insulated fabric duct for negative pressure
Insulated return air fabric duct system AV-RW
A return air duct system made of insulated fabric with an inner support frame that withstands negative pressure, replacing traditional sheet-metal return ducts. Light, hung like a fabric supply duct and matched to the supply system, with multi-point return for even air circulation.

Features
Why choose AV-RW
Frame rated for negative pressure
A strong inner frame keeps the duct from collapsing under suction.
Multi-point return
Air is drawn back at many points along the run, so the room air circulates evenly.
Clean return air
Return openings with filter mesh stop dust before it reaches the unit.
High thermal insulation
Fire-rated rubber foam with high thermal resistance.
Sound absorbing
The insulation layer absorbs noise for quiet operation.
Composite, 3,000 Pa
Multi-layer permanently fire-retardant fabric.
Light and quick to install
Hung the same way as fabric supply ducts.
Energy saving
Lower heat loss on the return path and environmentally friendly.
Specifications
Technical data and return air
AV-RW technical data
- Pressure resistance
- 3,000 Pa
- Construction
- Insulated composite fabric + inner support frame
- Insulation
- Rubber foam 5–45 mm or PE 3–30 mm
- Fire class
- A2 / B1 depending on the material combination
- Compatibility
- Matched to Airvex fabric supply ducts
- Cross-sections
- RoundRectangular
- Colours
- WhiteBlackGreyBlueGreenYellowRed
- Suspension
- Steel cable: single or multiple parallel rowsSteel pipe: single or multiple parallel rows
Return air options
AV-RWLaser-cut return holesReturn holes along the duct draw air evenly from many points.
AV-RWFiltered return diffusersDiffuser-type return outlets with integrated filter mesh.
AV-RWReturn grilles with filterRectangular return grilles with dust filter mesh.
Construction
Six composite material combinations
The code gives the outer layer, the insulation and the inner layer: A = A2 glass-fibre fabric, B = B1 fabric, R = rubber foam, P = PE. The layers are bonded by a hot-melt composite layer and held by an inner support frame.
RW-ARB
A2 glass-fibre fabric + rubber foam insulation + B1 fabric + inner support frame
Rubber foam 5 – 45 mmRW-ARA
A2 glass-fibre fabric + rubber foam insulation + A2 glass-fibre fabric + inner support frame
Rubber foam 5 – 45 mmRW-BRB
B1 fabric + rubber foam insulation + B1 fabric + inner support frame
Rubber foam 5 – 45 mmRW-APB
A2 glass-fibre fabric + PE insulation + B1 fabric + inner support frame
PE 3 – 30 mmRW-APA
A2 glass-fibre fabric + PE insulation + A2 glass-fibre fabric + inner support frame
PE 3 – 30 mmRW-BPB
B1 fabric + PE insulation + B1 fabric + inner support frame
PE 3 – 30 mmApplications
Where AV-RW is used
Large spaces with suspended ceilings
- Factories
- Commercial centres
- Exhibition centres
Public and service buildings
- Hospitals
- Administrative centres
- Public buildings
High spaces that need even return air
- Stadiums
- Airports and stations
- High-bay workshops
In detail
About the Insulated return air fabric duct system
Fabric ducts are normally used for supply air because the air pressure keeps them inflated. Return air works the other way round: the fan pulls air out of the duct, so an ordinary fabric duct would collapse. AV-RW solves this with a strong inner frame that holds the insulated fabric in shape under negative pressure.
Even return, clean air
Instead of one or two large return grilles, AV-RW draws air back through laser-cut holes, filtered diffusers or grilles distributed along the run. The room air circulates evenly, stagnant zones are avoided and the filters catch dust before it reaches the air handling unit.
A complete fabric system
AV-RW uses the same composite insulation as AV-W (six material combinations, rubber foam 5–45 mm or PE 3–30 mm) and is hung the same way, so supply and return can be designed, supplied and installed as one light-weight system. It is available round or rectangular.
Send us the return airflow and layout, and we will propose the return points and duct sizes.
Installations
AV-RW on site




Product range
Other Airvex models
Need a quotation for AV-RW?
Send your layout, airflow and ceiling height. An Airvex engineer will select the size, air distribution and suspension, and prepare your quotation.

AV-T
AV-J
AV-F
AV-RT
AV-RF
AV-W
Factories
Cold stores & food
Supermarkets & malls
Cleanrooms & pharma
Sports halls & auditoriums
Livestock farms
